1
00:00:00,820 --> 00:00:05,459
And this is the second video for the exercise number three of SketchUp

2
00:00:05,980 --> 00:00:09,080
In the last one we finished doing the circle remember when

3
00:00:09,759 --> 00:00:16,260
Doing the circle you have to put here with the keyboard the measure of the radius of the circle

4
00:00:16,300 --> 00:00:21,539
If like in the announcement like here you have the diameter is 40 millimeters

5
00:00:22,179 --> 00:00:27,300
For doing the circle here, you will have to write a radius of the half of it 20 millimeters

6
00:00:27,300 --> 00:00:37,420
Once we have it, we see that it is 40mm ahead from the base of the hexagon, so we are going

7
00:00:37,420 --> 00:00:45,179
to push it 40, we will write 40 with the keyboard and press enter.

8
00:00:45,179 --> 00:00:49,299
After that we have to do here the hexagon and the circle.

9
00:00:49,299 --> 00:00:53,500
In the announcement it says that this hole with the shape of an hexagon will have to

10
00:00:53,500 --> 00:00:59,320
pierced through the entire piece so through entire object so instead of

11
00:00:59,320 --> 00:01:04,060
doing first the circle and then the hole we are going to make the two things

12
00:01:04,060 --> 00:01:11,750
first and then push each one separately so let's start with the hexagon with

13
00:01:11,750 --> 00:01:18,230
hexagon we see that it is it has 50 millimeters of diameter from one side to

14
00:01:18,230 --> 00:01:33,079
the other, so we will have to write the half of it as its radius. 25, enter.

15
00:01:33,079 --> 00:01:38,700
Remember to do it like this, with the side pointing like this, like I made. If

16
00:01:38,700 --> 00:01:44,760
you do it like this, this will be a mistake, because in the

17
00:01:44,760 --> 00:01:50,540
announcement it says that it has to be this way. And now for the circles in its

18
00:01:50,540 --> 00:01:56,400
have since it has 90 millimeters diameters it will have 45 millimeters

19
00:01:56,400 --> 00:02:12,759
radius so from here we write 45 and will be like this so before elevating this part

20
00:02:12,759 --> 00:02:17,860
we are going to make the hole here since this height is 20 millimeters we are

21
00:02:17,860 --> 00:02:28,120
going to push this down 20 millimeters and it makes the hole automatically we

22
00:02:28,120 --> 00:02:33,819
can if we are not sure we can rotate the camera to prove that it is made

23
00:02:33,819 --> 00:02:50,759
properly and now we are going to elevate this other piece 130 millimeters like

24
00:02:50,759 --> 00:02:55,060
this with this the shape of the object will be complete the next part will be

25
00:02:55,060 --> 00:03:02,379
to give it color for the colors we will choose this tool and it will

26
00:03:02,379 --> 00:03:07,479
automatically open different option of colors these options are for changing

27
00:03:07,479 --> 00:03:11,500
all the object but we are going to choose this to apply different colors to

28
00:03:11,500 --> 00:03:16,780
the base and to the objects inside it doesn't have to be exactly the same as

29
00:03:16,780 --> 00:03:22,300
we have here is just enough to give different colors for each part or each

30
00:03:22,300 --> 00:03:30,569
piece so like this for example we can give this this part this color also from

31
00:03:30,569 --> 00:03:53,539
the inside remember to move the camera whenever you need now for this other

32
00:03:53,539 --> 00:04:20,399
part here we are going to give this other color for the hexagon this one for

33
00:04:20,399 --> 00:04:45,060
the base let's take this other and in the next video I will explain the last

34
00:04:45,060 --> 00:04:50,699
step to finish this project and how to save and send it