1
00:00:01,459 --> 00:00:09,460
Well, in this tutorial we are going to learn how to use Blockscat.

2
00:00:09,460 --> 00:00:24,460
Blockscat is a very intuitive program which lets us design objects which can be printed.

3
00:00:24,460 --> 00:00:41,859
Well, indeed, is the way that we should do this kind of designs, using blocks, using

4
00:00:41,859 --> 00:00:57,740
commands and is the way that other programs such as OpenSCAD usually does this kind of

5
00:00:57,740 --> 00:01:17,060
things. Well, we are going to use a blush cap to design a cup. If you see a cup you can

6
00:01:17,060 --> 00:01:31,760
analyze it and think that it has a handle and the other piece that is more or less

7
00:01:31,760 --> 00:01:43,819
a cylinder with a hole. So if you want to design this object

8
00:01:43,819 --> 00:02:01,819
Obviously, you should begin with the main shape of this cup, which is the cylinder.

9
00:02:01,819 --> 00:02:21,319
The BlocksCAD draws things using blocks, using commands, which is different from the other programs which have already been used.

10
00:02:21,319 --> 00:02:39,080
So, if you go to the page which is blogscout.h10workshop.com

11
00:02:39,080 --> 00:02:52,599
can register if you want to to keep your your draws and then have three areas

12
00:02:52,599 --> 00:03:02,900
which are one in you can see the result of your program the commands which is on

13
00:03:02,900 --> 00:03:19,259
the left and the work area so we are going to to create a cap firstly we

14
00:03:19,259 --> 00:03:29,740
with a simple block with the 3d figures if you want to 3d figures you can see

15
00:03:29,740 --> 00:03:41,500
that you can do some of them and for each figure you also have parameters in

16
00:03:41,500 --> 00:03:53,479
this case the cylinder you have to radius and height so fix it to

17
00:03:53,479 --> 00:04:08,800
radius to 40 millimeters and height to 90 you can see the result clicking on

18
00:04:08,800 --> 00:04:21,459
renderize and it is the result well what I want now

19
00:04:21,459 --> 00:04:35,319
I want to do a hole in order to get our cup so to do the hole we can use the

20
00:04:35,319 --> 00:04:46,779
command difference, difference remove the second part to the first part so if we

21
00:04:46,779 --> 00:05:00,779
do the difference between a cylinder of 40 millimeters remove a cylinder of 35

22
00:05:00,779 --> 00:05:13,889
milliliters the result is what you want but the cap is not very good because we

23
00:05:13,889 --> 00:05:24,470
we haven't a bottom piece so if you are clever enough to see this you can

24
00:05:24,470 --> 00:05:33,509
translate the the second cylinder and then do the difference and the result is

25
00:05:33,509 --> 00:05:35,829
is what you want, the cap.

26
00:05:36,769 --> 00:05:41,769
So now we have the cap to create the handle,

27
00:05:49,399 --> 00:05:53,240
but obviously to create the handle firstly,

28
00:05:54,079 --> 00:05:59,079
you should enable what you have already drawn,

29
00:06:01,060 --> 00:06:06,060
draw, because it's not clear

30
00:06:06,420 --> 00:06:17,540
it's not very easy to see what you are doing so firstly enable the object

31
00:06:17,540 --> 00:06:26,339
that you just already created and then we are starting with the handle

32
00:06:26,339 --> 00:06:41,079
which is more or less the same but less high logically so you can do the same as you have

33
00:06:41,079 --> 00:06:57,100
already done for the cup and if you do you will have a ring but it isn't

34
00:06:57,100 --> 00:07:11,120
located well you should locate it the ring in the cup so to locate

35
00:07:12,459 --> 00:07:24,079
you need firstly rotate the ring and then translate the ring and if you

36
00:07:24,079 --> 00:07:34,839
rotate and translate the ring and and then you enable what you have already

37
00:07:34,839 --> 00:07:51,040
the result is more or less what you can see here well and here I it's not the

38
00:07:51,040 --> 00:08:11,920
same because I just made the first cylinder and put the handle. Well, if you

39
00:08:11,920 --> 00:08:29,540
are a clever what you have to do now is to make the hole at the end so firstly you should join

40
00:08:29,540 --> 00:08:49,940
the first cylinder which height is 90 and then make the hole and we have our hat our cup finished

41
00:08:49,940 --> 00:09:04,120
and here it is the cap and finally you should download your work in

42
00:09:04,120 --> 00:09:24,940
xtl format because if you want to print your work and that we have

43
00:09:24,940 --> 00:09:32,220
study today I hope it could be it could be useful