1
00:00:00,000 --> 00:00:06,500
To prepare an electric circuit we are going to need a generator, that in this case is the battery

2
00:00:06,500 --> 00:00:14,000
We are going to need a receptor, that in this case is a light bulb

3
00:00:14,000 --> 00:00:21,000
We are going to need a switch to open and close the circuit

4
00:00:21,000 --> 00:00:28,000
And we are going to need cables to connect all the components

5
00:00:30,000 --> 00:00:35,000
Since I have three components, I am going to need three pieces of cable

6
00:00:35,000 --> 00:00:43,000
One, two and three, as you have seen in the circuit diagram

7
00:00:43,000 --> 00:00:47,000
What I have to do is peel the cable

8
00:01:00,000 --> 00:01:14,000
So when I put the cable in the battery, what is going to be in contact is the conductor

9
00:01:14,000 --> 00:01:18,000
And it is going to allow the electrons to move

10
00:01:18,000 --> 00:01:21,000
And the first thing we have to do is connect it

11
00:01:21,000 --> 00:01:28,000
For example, I am going to start with the switch

12
00:01:28,000 --> 00:01:37,000
And what I have to do is, once I have peeled the cable, I have to put the cable inside of the switch

13
00:01:37,000 --> 00:01:39,000
With the screwdriver

14
00:01:39,000 --> 00:01:44,000
I am going to tighten the screw

15
00:01:44,000 --> 00:01:47,000
So the screw is in contact with the cable

16
00:01:47,000 --> 00:01:52,000
And on the other part, I am going to do the same

17
00:02:03,000 --> 00:02:06,000
Now I am going to connect the light bulb

18
00:02:06,000 --> 00:02:12,000
So for this, we need to put one cable here

19
00:02:14,000 --> 00:02:18,000
That is going to be connected to this part

20
00:02:18,000 --> 00:02:24,000
And the other one, the other one, I am going to put it here

21
00:02:27,000 --> 00:02:30,000
I connect it here

22
00:02:37,000 --> 00:02:46,000
We have connected the light bulb, the switch, and now we have to connect it to the battery

23
00:02:55,000 --> 00:03:00,000
One to the positive, the other one to the negative

24
00:03:00,000 --> 00:03:04,000
The light should turn on

25
00:03:06,000 --> 00:03:08,000
And off