1
00:00:00,050 --> 00:00:18,050
Well, as you know, when you know that the computer is very important in so many fields and also, obviously, in design.

2
00:00:18,050 --> 00:00:33,049
So, there are a lot of programs such as KUGAD which is a good tool to do different design.

3
00:00:33,049 --> 00:00:47,049
I can use it to express our project doing this type of files.

4
00:00:47,049 --> 00:00:57,049
In this picture, we just explained how we can use this program to do isometric perspective.

5
00:00:57,049 --> 00:01:05,049
As you can see, it's very easy because you just only need to have to select the view,

6
00:01:05,049 --> 00:01:13,049
and when you have selected the view, you can transform the view into isometric.

7
00:01:13,049 --> 00:01:24,250
So, you can use one of the views and convert the view into isometric perspective, and if

8
00:01:24,250 --> 00:01:38,049
you have to use isometric perspective, then it is very easy that you can build the final

9
00:01:38,049 --> 00:01:48,349
using this program, as you can see in this video, we have the two views, which is the

10
00:01:48,349 --> 00:02:02,049
front elevation and one of the, in the left side elevation, so, with this, the last one,

11
00:02:02,049 --> 00:02:23,050
This is the plan, in the right position, we just undo, the only thing that we have to do is to use our knowledge of geometry to build the figure.

12
00:02:23,050 --> 00:02:35,430
And in order to do this, you can change the difference line and change its position to

13
00:02:35,430 --> 00:02:42,889
the right position until you have the figure.

14
00:02:42,889 --> 00:02:53,569
This is very easy, because it's very easy using this kind of program, as you can see,

15
00:02:53,569 --> 00:03:04,650
you have transferred the blue using the isometric axis, and then now you can move or copy the

16
00:03:04,650 --> 00:03:19,129
lines one by one until you have built the figure correctly this is the first so you move and then

17
00:03:20,330 --> 00:03:24,490
delete the other one move the other one

18
00:03:27,210 --> 00:03:36,280
to the right position we have at the bottom and at the middle

19
00:03:47,189 --> 00:03:58,189
It is really easy and really funny and it is the only way that can help you to do the figures.

20
00:04:22,579 --> 00:04:31,579
Just move it to the right position in the Z axis.

21
00:04:31,579 --> 00:04:51,439
Select and move, select and move, it's very easy, just only select and move, and then

22
00:04:51,439 --> 00:05:39,220
we need also to change the type of line, yes, this is the another line, and we can change

23
00:05:39,220 --> 00:05:47,220
continuous line to this continuous one because there are a lot of parts in the figure that you can't see

24
00:05:49,699 --> 00:05:54,339
but these these are lines that obviously resist

25
00:05:54,339 --> 00:06:24,129
So as you can see, using local cut, you can read the part, you can use this example, and

26
00:06:24,129 --> 00:06:26,129
it's a matured perspective.

27
00:06:26,129 --> 00:06:36,129
This line, for example, you can see, because it's inside of the figure, so if you want

28
00:06:36,129 --> 00:06:47,129
keep this line, keep it to change the type of line, you can't do this line but in discontinuous.

29
00:06:47,129 --> 00:06:53,129
The same as this other and so many lines is the same.

30
00:06:53,129 --> 00:06:58,129
What will happen as you can see is that sometimes the program

31
00:06:58,129 --> 00:07:11,129
But you must be safe and learn to relate the program with the figure, because it's not the total program.

32
00:07:11,129 --> 00:07:23,129
But here you can finish very easily this part, because you just only can change three lines.

33
00:07:23,129 --> 00:07:37,389
is another continuous line yes and we have another continuous line and two other which

34
00:07:37,389 --> 00:07:46,910
are discontinuous so you can delete it i recommend that you delete it don't use the discontinuous

35
00:07:46,910 --> 00:07:52,269
type because sometimes it's clear

36
00:08:09,850 --> 00:08:16,250
so moving the lines or drawing the lines

37
00:08:16,250 --> 00:09:06,779
is easy to do the pieces in this way

38
00:09:19,820 --> 00:09:26,460
but i think you can see the figure now because it's really easy

39
00:09:26,460 --> 00:10:15,889
It doesn't matter if you need to repeat it more than one time, because you are learning

40
00:10:15,889 --> 00:10:25,889
and sometimes the use of mouse makes so many hours of training.

41
00:10:25,889 --> 00:10:27,889
It's not easy sometimes.

42
00:10:27,889 --> 00:10:38,889
We usually use the nose, but indeed you need a training to be good with the nose.

43
00:10:38,889 --> 00:10:42,889
But the line is not necessary, I think.

44
00:10:42,889 --> 00:11:34,830
at a new line so we need to delete this line because there isn't any yeah this

45
00:11:34,830 --> 00:11:47,279
line is delete so now we have the figure in a symmetric perspective you can compare

46
00:11:47,279 --> 00:11:59,360
but that it is not the end yeah and it is so now we have the exercise the

47
00:11:59,360 --> 00:12:00,360
to that exercise.

48
00:12:00,360 --> 00:12:22,360
We have already studied about different types of ways that you can do lines using the cut

49
00:12:22,360 --> 00:12:30,759
that and now you need to convert the figure into isometric and this is all for today

50
00:12:31,399 --> 00:12:36,759
i hope it can be useful i see you in the next video