1
00:00:00,000 --> 00:00:03,500
Hi everyone, in this video I'm going to show you how to configure a router.

2
00:00:06,480 --> 00:00:10,619
First turn on your router and reset it by pressing the reset button on its back for

3
00:00:10,619 --> 00:00:19,780
about 30 seconds as shown here. Then connect your computer to the router with ethernet cable.

4
00:00:24,260 --> 00:00:28,320
Once we connect our computer to the internet what we are going to do is go to search panel

5
00:00:28,320 --> 00:00:33,340
and type cmd and press enter. Once you do that the following screen will show up and we will

6
00:00:33,340 --> 00:00:38,920
type IP protocol configuration and press enter to see the IP address of the internet. The IP

7
00:00:38,920 --> 00:00:43,799
address of the internet is the one which has puerta de enlance predeterminada in front now

8
00:00:43,799 --> 00:00:48,200
we will copy the number and search it up in the website once the screen comes we will put the

9
00:00:48,200 --> 00:01:03,840
username and password then change the name and password of the wi-fi then press on apply and

10
00:01:03,840 --> 00:01:08,959
wait for it to save changes once we do that we will click on basica then lan and change the

11
00:01:08,959 --> 00:01:34,340
direction ip now to enable dhcp you will have to click on habiliter ipv6 to give the same ip

12
00:01:34,340 --> 00:01:38,939
address to your device you will have to scroll down to DHCP Estaticas and type your name,

13
00:01:39,400 --> 00:01:43,219
what IP address you want to give and your Direction Mac of your device. To know the

14
00:01:43,219 --> 00:01:47,579
Direction Mac of your device you will have to open your settings, go to Wi-Fi and press on

15
00:01:47,579 --> 00:01:52,019
the blue exclamation mark and you can see your Direction Mac which is Wi-Fi address as shown in

16
00:01:52,019 --> 00:02:12,009
the video. Now put your Mac address on Direction Mac and press on Applicar and Acceptor. Once this

17
00:02:12,009 --> 00:02:19,460
screen shows off search the IP address that you put and earlier and search it. Then enter the

18
00:02:19,460 --> 00:02:31,060
configuration with the username and password. Then click on Basica then Lon and check if the IP

19
00:02:31,060 --> 00:02:35,879
address what you put earlier and the IP address of the device is same or not. If it is same then

20
00:02:35,879 --> 00:02:40,060
you now have learned how to change password and give same IP address that you put whenever you

21
00:02:40,060 --> 00:02:44,599
connect to Wi-Fi with that device. And on to the final step to enable Filtrato Mac you will have

22
00:02:44,599 --> 00:02:49,960
to click on wifi then control.cheso and click on the square in front of activar filtratopore mac

23
00:02:49,960 --> 00:03:01,580
then put the mac address of your device. Once you put the mac address scroll down and click

24
00:03:01,580 --> 00:03:06,979
on aplicar. Now you have learned how to activate filtratopore mac. Thanks for watching have a good

25
00:03:06,979 --> 00:03:07,280
day