Activa JavaScript para disfrutar de los vídeos de la Mediateca.
Sketchup 3 parte 1 en inglés - Contenido educativo
Ajuste de pantallaEl ajuste de pantalla se aprecia al ver el vídeo en pantalla completa. Elige la presentación que más te guste:
This is the video for the third exercise we are going to do with the SketchUp.
00:00:00
In this exercise we will have to do this object here, and here you will have the measure.
00:00:05
So let's start with this.
00:00:12
So always remember, when creating a new one, choose the template in millimeters.
00:00:14
So let's start by doing the base.
00:00:25
As you can see here the base is 100mm this side and 360mm this other and then 20mm height.
00:00:27
So let's start with the measure tool to write, remember to write the measures with the keyboard.
00:00:37
Press enter, this is the same 100mm and this other 360mm.
00:00:48
the measures with the keyboard and press enter to pull them, once I have this I can choose
00:00:58
the square tool or rectangle tool and make a rectangle using the points we take as reference
00:01:09
and then again writing the height with the keyboard and this will be the base.
00:01:20
The next part we will have to place these two structures over the base and we can see
00:01:28
that the center of each one is the first one at 120mm from the border and the other at
00:01:35
another 120 millimeters from the first one so let's use again the measure tool
00:01:46
to make those marks so from here we write 120 and since I take from the
00:01:54
middle it just make a line parallel to this other if I take for another from a
00:02:09
corner for example like this I could make the line in the other axis but
00:02:20
right now it is useful to do it this way and now the other will be at 240 from
00:02:28
this point I will make a mark at 50 millimeters to make the middle and
00:02:39
another mark here so this will be the center of this other two structures so
00:02:48
the next part will be first to make the hexagon here and then the circle or I
00:02:55
could make the circle first and after that the hexagon for the circle I see
00:03:01
that it is 40 millimeters diameter so I'm going to to make first the hexagon
00:03:06
the hexagon I see that it is 80 millimeters and also it is in parallel
00:03:17
to this side so from this point I'm taking this line as a reference I will
00:03:30
have to write 30 80 millimeters so it will be 40 millimeters radius like this
00:03:36
and now to push it and see its height is 30 millimeters so I write 30 now I will
00:03:52
have to mark the middle of the hexagon again so I could I can just make this
00:04:09
line and then this other and I will have here the middle and take the the circle
00:04:16
to make a circle of 40 mm diameter. So I am going to write a circle. Remember to write
00:04:26
like this. And I will continue in the next video. Remember the radius is 20 mm.
00:04:49
- Idioma/s:
- Autor/es:
- David Sanz Martín
- Subido por:
- David S.
- Licencia:
- Dominio público
- Visualizaciones:
- 5
- Fecha:
- 15 de noviembre de 2020 - 17:20
- Visibilidad:
- Público
- Centro:
- IES VILLABLANCA
- Duración:
- 04′ 58″
- Relación de aspecto:
- 2.37:1
- Resolución:
- 1920x810 píxeles
- Tamaño:
- 31.08 MBytes
