Saltar navegación

Activa JavaScript para disfrutar de los vídeos de la Mediateca.

configuracion del router - Contenido educativo

Ajuste de pantalla

El ajuste de pantalla se aprecia al ver el vídeo en pantalla completa. Elige la presentación que más te guste:

Subido el 19 de marzo de 2024 por Rohit H.

10 visualizaciones

Más información Transcripción

Descargar la transcripción

Hi everyone, in this video I'm going to show you how to configure a router. 00:00:00
First turn on your router and reset it by pressing the reset button on its back for 00:00:06
about 30 seconds as shown here. Then connect your computer to the router with ethernet cable. 00:00:10
Once we connect our computer to the internet what we are going to do is go to search panel 00:00:24
and type cmd and press enter. Once you do that the following screen will show up and we will 00:00:28
type IP protocol configuration and press enter to see the IP address of the internet. The IP 00:00:33
address of the internet is the one which has puerta de enlance predeterminada in front now 00:00:38
we will copy the number and search it up in the website once the screen comes we will put the 00:00:43
username and password then change the name and password of the wi-fi then press on apply and 00:00:48
wait for it to save changes once we do that we will click on basica then lan and change the 00:01:03
direction ip now to enable dhcp you will have to click on habiliter ipv6 to give the same ip 00:01:08
address to your device you will have to scroll down to DHCP Estaticas and type your name, 00:01:34
what IP address you want to give and your Direction Mac of your device. To know the 00:01:39
Direction Mac of your device you will have to open your settings, go to Wi-Fi and press on 00:01:43
the blue exclamation mark and you can see your Direction Mac which is Wi-Fi address as shown in 00:01:47
the video. Now put your Mac address on Direction Mac and press on Applicar and Acceptor. Once this 00:01:52
screen shows off search the IP address that you put and earlier and search it. Then enter the 00:02:12
configuration with the username and password. Then click on Basica then Lon and check if the IP 00:02:19
address what you put earlier and the IP address of the device is same or not. If it is same then 00:02:31
you now have learned how to change password and give same IP address that you put whenever you 00:02:35
connect to Wi-Fi with that device. And on to the final step to enable Filtrato Mac you will have 00:02:40
to click on wifi then control.cheso and click on the square in front of activar filtratopore mac 00:02:44
then put the mac address of your device. Once you put the mac address scroll down and click 00:02:49
on aplicar. Now you have learned how to activate filtratopore mac. Thanks for watching have a good 00:03:01
day 00:03:06
Subido por:
Rohit H.
Moderado por el profesor:
Antonio Ortega Manchón (antonio.ortegamanchon)
Licencia:
Dominio público
Visualizaciones:
10
Fecha:
19 de marzo de 2024 - 22:14
Visibilidad:
Público
Centro:
CEPAPUB ALUCHE
Duración:
03′ 12″
Relación de aspecto:
1.78:1
Resolución:
1920x1080 píxeles
Tamaño:
115.10 MBytes

Del mismo autor…

Ver más del mismo autor

EducaMadrid, Plataforma Educativa de la Comunidad de Madrid

Plataforma Educativa EducaMadrid