Activa JavaScript para disfrutar de los vídeos de la Mediateca.

REPETIER HOST - Contenido educativo

Ajuste de pantalla

El ajuste de pantalla se aprecia al ver el vídeo en pantalla completa. Elige la presentación que más te guste:

Subido el 11 de septiembre de 2018 por Isabel L.

97 visualizaciones

Más información Transcripción

Descargar la transcripción

well by clicking and we have only see it would be very complicated so the more 00:00:00

simple, the simplest to simplify the process, we just only see the basic things. Well, here we are, 00:00:36

this is the Regeter host and as you see, you can see the feature, you can see what you want to 00:00:47

print here in this part of the program. We also have some functions here in the top of the program 00:00:54

and also there are some other important functions there so if you want just only go to 00:01:03

upload to open the stl file for example this one 00:01:18

like this, this adverb object, but it is now in .stl format. 00:01:28

We want to create a file which format should be a gcode. 00:01:36

So, what you have to do is come here 00:01:43

and you can see the configuration of the regular host. 00:01:57

You can change the main parameters of the slicer. 00:02:07

So you usually can have a file with these specific things. 00:02:14

So if you want to create a decode file, 00:02:24

just click in this section and you can get the file. 00:02:28

You need more than 4 hours to print this file with 450 libres and so on. 00:02:43

These are the parameters of the printing process. 00:02:55

You can create your own parameters, for example, you can change the number of layers, you can change, for example, also the temperature for the printer, that usually is about 210. 00:03:01

It depends, obviously, the material in which you are going to print in the object. 00:03:17

For PLA, usually it's enough with 210 degrees, but you can change it if you want. 00:03:25

and now this is the HECO you should you can edit the HECO you should save this file in a SD card 00:03:41

to print this object in the printer so and then this is our file that we can use for the printer 00:03:57

it's not for you you there modifies you see here parameters for the printer parameter for 00:04:25

For the extruder, there is a little bit high, 00:04:39

this temperature, let's start. 00:04:43

No more than 230 degrees, 00:04:45

so about 250 more or less is the dimensions. 00:04:49

So, there are the parameters for our printer. 00:04:55

And you can change, 00:05:02

here you can change the difference parameter, 00:05:05

That is not necessary, right? 00:05:09

That is all about Redditor host. 00:05:17

Idioma/s:
Autor/es:: ISABEL LAFUENTE
Subido por:: Isabel L.
Licencia:: Reconocimiento - No comercial
Visualizaciones:: 97
Fecha:: 11 de septiembre de 2018 - 17:32
Visibilidad:: Público
Centro:: Sin centro asignado
Duración:: 08′ 36″
Relación de aspecto:: 16:10 El estándar usado por los portátiles de 15,4" y algunos otros, es ancho como el 16:9.
Resolución:: 1280x800 píxeles
Tamaño:: 18.52 MBytes